Medical & Healthcare ETP

Compact treatment packages for clinical, laboratory and healthcare wastewater.

WHAT IT IS

A controlled process. For a complex wastewater stream.

Healthcare wastewater may carry microorganisms, pharmaceuticals, disinfectants, laboratory residues, blood-contaminated water and other chemicals. The treatment arrangement needs to reflect the facility’s activities and wastewater analysis.

The supplied system description combines collection, pretreatment, biological treatment where required, filtration or MBR options and disinfection in a compact package. It is especially relevant to facilities with restricted installation space and relatively low wastewater flow.

HOW IT WORKS

Follow the treatment.

An indicative sequence, adapted to the wastewater and installation.

01
Collection
Convey wastewater by gravity or pumping to match the drainage layout.
02
Screening / pretreatment
Protect pumps, filters and downstream equipment from larger solids.
03
Biological treatment
Use a biochemical chamber where organic pollutants require it.
04
Filter or MBR
Select filtration or membrane separation for the water-quality objective.
05
Disinfection
Apply and verify a suitable disinfection stage before discharge.
06
Treated-water discharge
Confirm applicable limits, including chemicals, pH and microbiological parameters.

KEY SYSTEM FEATURES

The details behind the system.

An integrated treatment package

A biochemical chamber, filter or MBR section and disinfection chamber bring selected treatment stages into one enclosed arrangement.

Equipment and service access

The described layout includes a suction pump, inlet and outlet, pump connection, overflow, ventilation and a supporting base frame.

Configure for the facility

Laboratory activities, chemicals, daily and peak flows and discharge destination determine additional dosing, equalization or pretreatment needs.

Verify the disinfection stage

Technology, contact time, wastewater quality and the applicable microbiological requirements must be checked through the project design and commissioning.

APPLICATIONS / SUBJECT TO ASSESSMENT

Where it can fit.

Hospitals and community healthcare centres
Clinics and outpatient facilities
Dental clinics and hospitals
Diagnostic and pathology laboratories
Aesthetic-treatment clinics
Medical institutions

TECHNICAL BASIS / VERIFY FOR THE PROJECT

Confirm the design basis.

No universal sterilization or removal percentage is claimed. Disinfection performance depends on the technology, contact time and wastewater quality. Facility flow, infectious-risk profile, chemical use, effluent limits and public-health requirements must be reviewed for each installation; the final configuration and compliance require project-specific verification.

EXPLORE / NITANEER PLANTS